Tuesday, 10 January 2006

New remote arrives...

The replacement alarm remote arrived this morning and is now setup and working. Pretty easy to program the new fob...

1 Arm and disarm the alarm sixteen times or until the alarm stops responding, alarm now in program mode.....

2 Once in program mode press the button of the new remotes(s), press the button of the original remote(s). This must be done within 8 seconds of each action. If 8 seconds pass without any actions the alarm will automatically exit programming mode and you will have to start from step 1.

3 Wait 8 seconds to exit learning mode.

4 Test remotes.

The range is also loads better than the original remote. Will be getting a new key cut tomorrow to fit in the fob.

Heat shield starting to piss me off now..

No comments:

Post a Comment